• Dimensions: 12.25"W x 16"H
• Base: 6"W
• Holds approximately 2 gallons of water
• Weight: 66 lbs.
• Shown in Greystone (GS)
• Sound Type: Echo
• Fiber reinforced cast stone concrete construction
• Proudly designed and manufactured in the United States
• No plumbing is needed; water recirculates within the fountain
• Plugs into any standard 3-prong 110 V electrical outlet
• An outdoor-rated extension cord can be used to lengthen the cord

Includes

• Wide choice of color options
• Recirculating electric pump included
• All hardware and tubing required to properly assemble the fountain
• Full step by step directions

Due to the nature of concrete, there is very little that can go wrong with it as long as it's properly cared for. For this reason, Campania does not offer a warranty for their products. Our 15+ years of experience has shown that Campania's products are more than capable of withstanding the test of time. These products are designed to last well over 40 years, and will as long as proper care is provided for them.

We suggest that birdbath/fountain tops not be left outside in the winter. Once the top fills with water/snow and freezes, the top may crack. All birdbath/fountain bases, bench legs and statuary should be raised up off the ground in winter so they will not freeze to the ground surface. Ideally, a fountain should be stored indoors in the winter away from the elements. However, if a fountain bowl must be left outside, remove all pumps, rubber stoppers, drain pipes, finials and small components, and cover the top with burlap or any absorbent material (old blanket/towel) and then wrapped with dark plastic, making sure that water does not accumulate in the basin and freeze. Fountain pumps, finials, and other small components should be stored indoors. Check the fountain periodically to insure that the cover is secure and water is not accumulating in any fountain component.

Campania proudly manufactures its cast stone products in the USA using locally sourced materials. All of our cast stone pieces are manufactured using the wet casting technique with a proprietary high density cast stone mix, yielding a PSI strength of approximately 7,500. The mix is comprised primarily of water, sand, stone aggregate and cement. Our cast stone products may qualify for LEED credits as applicable to your project. Cast stone produces a strong and durable product that will weather naturally in an outdoor environment. Simply stated, cast stone is chosen for its beauty and authenticity. Our material is natural, authentic, made in the USA, and 100% recyclable.

NOTE: All of our patinas are hand applied in a multi-step process which produces unique and beautiful surface finishes. Designed to replicate the look of naturally aged materials, the patinas will not prevent the natural aging process that occurs in an outdoor environment. Rather than creating uniform stains, our approach gives our products their unique beauty and appeal.

It is very important for you to protect your cast stone and pottery fountains, birdbaths, planters and statuary from the freeze-thaw cycle during the winter months. Ideally, cast stone and pottery decor that can collect water, should not be left outside when temperatures dip down to freezing. They should be stored indoors or in a dry protected place such as a covered porch or garage that is away from the elements. This is not always possible, so it is recommended that you completely dry out your decor and add a waterproof cover. This is because any cast stone or pottery component that can hold water and freeze has the potential to crack and crumble. Components such as fountain pedestals which remain in a basin/pool can also crack or crumble.

For more information on winterizing your cast stone fountain and birdbath, click here.

For more information on winterizing your cast stone planters and statuary, click here.

Fore more information on winterizing your glazed and terra cotta pottery, click here.